StaRite/Pentair - Touchpad, Pentair Max-E-Therm, 6 Pin - 42002-0029Z

Touchpad, Pentair Max-E-Therm, 6 Pin:
There are two different boards and touch pads that may be found in the field. One is the standard 6 pin board and the other is a 9 pin board. The notable difference is added buttons on the touch pad labeled "Filter Pump", "Aux 1" and "Aux 2." The three extra pins were for these buttons. These were used with a Sta-Rite automation system called the Max-Plus Control. These control systems are no longer manufactured. The current board is a 6 pin board and when replacing a board or touch pad, it is important to connect them properly.
If you are replacing a 9 pin board with a 6 pin board, connect the 6 pin board to the bottom 6 holes of the ribbon cable (with blue ribbon cable on the right side).
If you are replacing a 9 pin touch pad with a 6 pin touch pad, connect the ribbon cable to the bottom 6 pins of the 9 pin board (with blue ribbon cable on the right side).
Identical to: 6290-527 , 6291-070 , 42002-0029Z , 7.8837972483e+011