Add To Cart to checkout with: Credit Card, Amazon Pay, Apple Pay, or Google Pay
This pump has been discontinued. Please use the kit in the link below for replacement:
Dimension One - 230V Circulation Pump, Laing E10, With Built-In Pressure Switch Replacement - 01512-320E-KIT
If your old circ pump is 115V, and you want to keep it that way, you can use:
1. 6500-460 Replacement Pump
2. 34-0221-K An external flow switch that must be installed in the plumbing.
Discontinued
Dimension One - Circulation Pump, Laing E10, With Built-In Pressure Switch - 01512-320E
Parts Included in Kit:
1. Pump - E10-NSHF2W-22AND30-1190-C6
2. Cord Adapter - 30-1190-L6/5-50-0079
Dimension One - Circulation Pump, Laing E10, With Built-In Pressure Switch - 01512-320E
The original red or blue pumps have been upgraded to the new all-black model which includes both dry run protection and an integrated flow switch.
*PLEASE NOTE* This pump is not compatible as a replacement for a fountain circulation pump. For fountain cic pump, please see 01512-321 and 01512-330. This circ pump includes a flow switch. Not compatible with Arena or AFS.
If replacing from non-E10 circ pump, please follow instructions that come with the pump as there are wiring differences. This redesigned and upgraded 80 watt / 230 volt pump replaces your original 98w /115 volt version.
Instructions for conversion from 115V pump to the new 230V pump:
Simply move a neutral wire from the circulation pump plug (where it attaches on the circuit board) and put it on line 2 of the incoming power, at the time of installation to accommodate the voltage increase.
To Make it 220V ready: Move White Wire (neutral) from P41 to P54
Where to connect pressure switch to circuit board: Connection P10 (Bottom, Right Corner) Many low flow/heating problems can be corrected with a new circulation pump, so call us first to review troubleshooting tips before replacing other parts.
So easy we'll even walk you through it on the phone! (Let us know if you need a technician to call to assist).
Accessory Pump Type | Circulation |
Manufacturer | Laing Thermotech/Gould |
Pump Model | E-10 |
Speed | 1 Speed (1-Spd) |
Motor Voltage | 230v |
Drain Plug Location | None |
Suction Style | Center |
Suction Connection Type | Barb (b) |
Suction Pipe Size | 3/4" |
Discharge Style | Side |
Discharge Connection Type | Barb (b) |
Discharge Pipe Size | 3/4" |
Motor Amperage/Wattage | 70w |