Jacuzzi®/Sundance® - Pump 2.5HP, 240V, 60Hz, 1-Speed, TheraMax, 3:00 - 6500-263, 6500-767, 6500-341+6000-532 (Discontinued, Reccomended Replacement in Description)

Jacuzzi®/Sundance® - Pump 2.5HP, 240V, 60Hz, 1-Speed, TheraMax, 3:00 - 6500-263, 6500-767

Recommended Replacement Options:

Pump + Bracket - 6500-343 & 6000-532

Cost Effective Options - 48WUA2002C-I

Spa Pump for Sundance Spas  6500-263, 6500-763, 6500-341

Specifications: 

• 1 Speed 
• 2.5 HP / 4.2 Brake HP 
• 230 Volt 
• 12.0 Amps (measured at 6 MBHP with Aquaflo/Gecko wet end) 
• 10.0 Amps (measured at 4.2/2.5 HP with Sundance/Jacuzzi wet end) 
• 48 Frame 

Comes Complete with the motor and wet end/pump housing. 

Does not come with the power cord or Hose Barb 6540-171     

The Pump is complete with a US Motor and the Jacuzzi®/Sundance® wet end. The difference between the Factory OEM Pump, available from us, is that ours comes with the original welded bracket on the motor instead of the bracket mount currently used by Sundance®. 

Our pump replaces the original found in your spa that had the mounting bracket welded to it. 

This can be used for other pumps by Jacuzzi®/Sundance® by simply adjusting the position of the wet end by loosening the 4 bolts (this is a thru bolt motor) and turning the wet end to the position of the original pump and then retightening the 4 bolts. We send this pump out in the 9:00 o'clock position. 

The 6540-171 Hose Barb is used on many of the Jacuzzi®/Sundance® Pumps (you would need to verify) and was originally made of plastic which eventually fails. 

Please note that the threads are NOT standard MPT threads and you cannot use an over the counter hose barb (from a Hardware Store). If you do it will strip the threads and cause leakage and ruin the Pump Housing (not covered under warranty). 

This pump and motor comes with a 1 year warranty from date of purchase.  

Used on the Following Sundance® Spa Models: 

• Altamar - 1998-05/2009 
• Bahia - 10/2002-2006 
• Cameo - 1997-2004 
• Certa - 2007+ 
• Chelsee - 2007-04/2010 
• Hamilton - 2007-04/2010 
• Hartford - 2007-04/2010 
• Hawthorne - 2007-04/2010 
• Majesta - 2004-2005 
• Madison - 1998-1999 
• Maxxus - 1999-2004 
• Montego - 1991-1999 
• Optima - 1997-2004 
• Palermo - 2005 
• Telluride - 1998-04/1999 2005-2009 (end date changes with different models): Sundance® Spas went to the 6500-343 on most models listed. 
  

The difference is that the pump and motor did not have a welded foot bracket so that the pump would fit any configuration. Pump housings are universal and can be rotated to any configuration. This can be used for other Sundance pumps by adjusting the position of the wet end. 

Simply loose the rear 4 bolts (this is a thru bolt motor) and turn the wet end to the position of the original pump then retightening the 4 bolts. 

Used On the Following Jacuzzi® Spa Models: 

• 2002-2003 J-340, J-350 (their #6500-349) 
• 2005-2006 (Pump #2): J-335, J-345, J-365 
• 2006-2007 (Pump #2): J-365  2007+ J-270, J-280, J-335, J-345, J-355, J-365 (Pump #1, when pump is a 48 frame)
• 2008+ (Pump #2): J-375   

Pump housings are universal and can be rotated to any configuration. This can be used for other pumps by Jacuzzi®/Sundance® by simply adjusting the position of the wet end by loosening the 4 bolts (this is a thru bolt motor) and turning the wet end to the position of the original pump and then retightening the 4 bolts. We send this pump out in the 9:00 o'clock position. This pump can be used for the following pump numbers by rotating the wet end to match the position of the original pump.  

Replaces: 6500-263, 6500-763, 6500-341, 6500-307, 6500-349, 6500-903, 6500-824