Jacuzzi®/Sundance® - Pump TheraMax 2.5HP, 240VAC, 60Hz, 2-Spd - 6500-261, 10-4234211, 4234211-S

Jacuzzi®/Sundance® - Pump TheraMax 2.5HP, 240VAC, 60Hz, 2-Spd, 1:30 Position - 6500-261, THERAMAX-2B

Sundance® Spas TheraMax Pump 6500-261:

• 4HP Braking / 2.5HP True
• 240VAC/60Hz
• 11A/3.3A
• 2-Spd
• TheraMax,
  

Bracket Sold Separately: 6000-532

This is a newer pump design. Your old pump had the mounting base attached to the bottom of the pump. The new design requires a separate pump bracket for easier installation. The new pump does not come with an electrical cord. Reuse the electrical cord from the pump being replaced.  

Current Replacement Pump for Sundance® Spas & Sweetwater Models: 

Pump #1 on the control panel  Altamar®, Austin, Bahia, Burlington, Calypso, Calypso I, Calypso II Cameo®, Camden®, Capri®, Caprio ST, Cayman®, Certa®, Corum, Cyprus Hamilton®, Hartford, Hawthorne®, Madison®, Marin®, Majesta®, Maxxus®, Montego Optima®, Olympia, Palermo, Rio, Telluride 

Current Replacement for Jacuzzi® Brand Hot Tub Models: Pump #1 on the control panel J-230, J-335, J-345, J-355, J-365, J-375, and J-385 until July 2010 J-270, J-280 - 2007-7/2010 J-325 - 2005-2006 J-330, J-340, J-350, J-360, J-370, J-380 - 2002-2003 Replaced these old pump part numbers  6500-128, 6500-138, 6500-254, 6500-265, 6500-261, 6500-260 6500-268, 6500-754, 6500-760, 6500-761, 6500-764, 6500-768 S35A9-B (Gatsby Spas), 6500-261, 6500-761, 6500-128

Most spa pumps ship with the wet end in the upright position in form-fitting foam to ensure safe transit. You simply loosen the four bolts at the rear of the motor and rotate the wet end to the desired position and then tighten the bolts back. It's very quick and easy and you don't have to mess with any seals or anything.