Add To Cart to checkout with: Credit Card, Amazon Pay, Apple Pay, or Google Pay
Sundance® Spas - Circuit Board PCB, 850, REV 1.29E, NO CIRC - 6600-018
1995-97 WITHOUT PERMA CLEAR 6600-018 Sundance® Spas Circuit Board: 1995-1997, 1&2 Pump Systems without Perma Clear (No Circulation Pump)
Sundance® Spas used the 6600-017 and 6600-018 as the same board many times and would replace the eprom to the system.
To help clarify: A Non Circulation Pump System used an Eprom chip with a 1.29 number, so if your board has an Eprom chip with a 1.29 (usually starts with REV and located on a chip on the board) then the circuit board you need is this one: 6600-018.
Usually Circulation Pump Systems have used Eproms with 1.28E, 1.28F and 1.28FB. So if your board has one of these Eprom chips , then you have a system with a circulation pump and the board you need is a 6600-017. Also note that a circulation pump is not one of the main spa pumps but is a small pump like a Grundfos or Laing Pump
Technical Note: 6600-023, 6600-028, 6600-017, 6600-018 are the same circuit boards with different eproms.
This Circuit Board is used on the following models and years: (Please verify that this is the correct board for your spa.) 1. 1995: (6600-014 was used until 10/95 then was replaced by 6600-018) Cameo 850, Capri 850, Corum 850, Marin 850, Optima 850 2. 1996: Cameo 850, Capri 850, Corum 850, Marin 850, Optima 850 3. 1997: Cameo 850, Capri 850, Corum 850, Marin 850, Optima 850