Underwater Magic - Sealant, Underwater Magic, 290ml/9.8oz Tube, Gray - UWM-04

California Residents WARNING: This product can expose you to chemicals including Dioctylbis (pentane-2,4-dionato-O,O)tin,N-[Dimethoxymethylsilyl)propyl] etylenediamine, N-[3-(Trimethoxysilyl)propyl]ethylenediamnine, which is known to the State of California to cause cancer and reproductive harm

www.P65Warnings.ca.gov

Like all great inventions, Underwater Magic™ was born from a need. 

The need for a glue that could perform as well under water as above it. And one that would enable us to bring together those two worlds with astonishing results.  

Starting with a successful formula used by commercial divers to seal leaks in ships, we teamed with an industry-leading German scientist to push the limits of chemical engineering and created a product that we are proud to call our own. A product that would be aptly named after how it is so often described: Underwater Magic™.  

Underwater Magic™ is based on a formula already used by commercial divers to seal ship leaks , under strict maritime authority regulations on site at the port or out on the open sea.  After further development of the product's formula it has been developed so that it is not only suitable for seawater, it is and since 2009 also resistant against chlorine water and other chemicals.  

Underwater Magic™ is a 1 component sea and chlorine water resistant glue, which even seals underwater. It is odour free, it's free of: Oxime - acetic acid - isocyanate & solvents , 100% silicone free and Is not affected by: chlorine / salt (sea) water, weathering and uv light, Aliphatic solvents, oils, grease, diluted inorganic acids and alkalis.  

Underwater Magic™ is permanently elastic with good abrasion resistance and good mechanical properties. Temperature resistant from -40°C/°F degrees to +90°C / +194°F, for a short time ( 2 to 3 hours) even to +200°C / +392°F, can fill gaps of up to 40 mm and is allowed in areas close to food.  Underwater Magic™ comes in a Standard 'Silicone tube size' used with a standard caulking gun with a filling of 290ml (approx. 9.8 US fl. oz.) or as 600ml bag (approx 20.29 US fl. oz.).    

• No complicated mixing 
  
• No clouds in your pool 
  
• Use it while your pool is in use  
  
• No silicone contamination  
  
• Long lasting   
  

Note: This product is not compatible with vinyl.