Balboa - Control System Kit, BP7, 5.5kW, w/TP500 Topside - G6505

Balboa - Control System Kit, BP7, 5.5kW, w/TP500 Topside - 50-BP7-500-55-K, G6505

• This item has FREE SHIPPING

Includes 5.5KW BP7 Control Pack, TP500 Topside Panel, & Adapter Plate:

TP500 Topside Control Panel:

Topside Type	Electronic
Manufacturer	Balboa Water Group
Cord Connector Type	Molex, 4-Pin
Model	TP500
# of Buttons	6
Topside Shape	Rectangular
Cord Length	7ft
Panel Size	6-3/8" x 2-1/4"

Adapter Plate:

Manufacturer	Balboa Water Group
Model	TP500, TP500S
Hole Size	1-5/8" x 5-11/16"
Panel Size	4" x 9"
Part Type	Adapter Plate

Replaces: 389172

Kit includes: system, panel, panel adapter plate, light cord and overlay(s) & FREE LED BULB

System (and any replacement board) is typically shipped in Setup 21

BP7 Control System Bundle The Next Generation of Balboa BP Hot Tub Control Systems is finally here. With 7 relays, the BP7 has 32 different setups and can power a spa with 1-4 pumps, including Microsilk systems. Can also replace any Balboa BP System* while using the existing topside that is already installed on the spa. Will replace any Balboa VS or EL System* when you match it with any TP or SpaTouch topside panel. Will replace any Balboa or other brand’s non-low flow system* when you match it with any TP or SpaTouch topside panel. This system can only be used as 220v.

• System Input Voltage - 230V Only
• Main Circuit - 2- Speed Pump 120/240V
• 2nd Circuit - 1- Speed Blower or Pump 120/240V
• Heater Style - Straight/Fixed, Wattage - 5.5kW
• Topside Control Included- TP500
• Supports all TP and SpaTouch topsides
• (LED, Color LCD and Touchscreens)
• Wi-Fi capable – 59303 (not included, must be purchased separately)

BP7 Features-
7 Relays - The BP7 has 32 different setups and can power a spa with 1-4 pumps, including MicroSilk systems

CAN REPLACE ANY BALBOA SYSTEM*
While using the existing topside that is already installed on the spa

CAN REPLACE ANY BALBOA VS OR EL SYSTEM*
When you match it with any TP or SpaTouch™ topside panel

CAN REPLACE ANY BALBOA OR OTHER BRAND'S NON-LOW FLOW SYSTEM*
When you match it with any TP or SpaTouch topside panel.
*Some exceptions may apply.Supports all BP ancillary products
(ControlMySpa™, BBA™, CZ™ and Status Pro)NOTE- When replacing VS systems with the BP7 systems, BP7 box is larger. BP7 Control Box measurements-
11.50 H x 16.99 L (with heater) x 4.80" DNOTE- BP7 system has an input voltage of 240 volt ONLY. But can be converted and ran for 120 volt component inputs. See install info or call a technician for assistance.Component Configuration - Pump1 + Pump2

Replaces: 

• 54219
• 54216
• 54217
• 54220

Will Operate:

Circ + two 2spd pumps + Blower + Ozone
Circ + two 2spd pumps + 1spd P3 + Ozone
Circ + three 1spd pumps + Ozone
Circ + 2spd P1 + three 1spd pumps + Ozone
Circ + 2spd P1 + 1spd P2 + Blower + Ozone2spd P1 + three 1spd pumps + Ozone

Number Of Appliances	2
Manufacturer	Balboa Water Group
Model	BP7
Supply Voltage	230v - 3 Wire, 230v - 4 Wire
Heater Type	Fixed - Bottom
Heater Wattage	5.5kW
Topside Included	TP500
Circ Pump Ready	Optional 115v/230v
Auxiliary Topside Ready	Yes
Fiber Optic	No
Accessory Ready	Yes
Wi-Fi Compatible	Yes
50/60 HZ	50Hz, 60Hz