Sundance® Spas - Circuit Board PCB: LCD 2-Pump, 2-Speed, 60HZ, 2014 - 6600-730

Sundance® Spas - Circuit Board PCB: LCD 2-Pump, 2-Speed, 60HZ, 2014 - 6600-730

Please Note: 

If 850 Series (1999-2005) or if Pump 1 is 2-speed, use 6600-730 as a replacement.
If 880 Series (2005-2010) or if Pump 1 is 1-speed, use 6600-728 as a replacement.

Works with topside panels: 6600-860 & 2600-323

Replacement option for:

AI# SD6600-028 MFG# 6600-028

AI# SD6600-056 MFG# 6600-056

AI# SD6600-092 MFG# 6600-092

AI# SD6600-180 MFG# 6600-180 850 Series 1999-05 or if Pump 1 is 2 Speed 

Replaces: 

• 6600-730
• 6600-092
• 6600-092
• 6600-028
• 6600-056
• 6600-092
• 6600-180
• 
  
• 
  

If 850 Series (1999-2005) or if Pump 1 is 2-speed, use 6600-730 as a replacement.
If 880 Series (2005-2010) or if Pump 1 is 1-speed, use 6600-728 as a replacement.

Jumper settings are as follows:

JP19 Jumper Bank

• JP19-1 - On - Celcius, Off - Fahrenheit
• JP19-3 - On - 50Hz, Off - 60Hz
• JP19-5 - On - LED Lights, Off - Incandescent Lights
• JP19-7, 9, and 11 are not used

JP9 Jumper Bank

• JP9-1 - On - Enables Trouble Log, Off - Disables Trouble Log
• JP9-3 - On - Enables ILOC, Off - Disables ILOC
• JP9-5 - NOT USED
• JP9-7 - On - 60A Logic Allows 2 Pumps on w/Heater, Off - 50A Logic Forces Heater Off When More Than 1 Pump is ON
• JP9-9 - On - Enables Pump 2 on -728/-730 pcb's and Pump 3 on -392 pcb, Off - Disables
• JP9-11 - On - 40A Logic Forces Heater off w/ Any Pump in Hi, Off - Disables
• JP9-13 - On - Allows Only 1 Pump w/Blower to Operate at a Time, Off - Blower, Pump 1, Pump 2 Can Operate at the Same Time
• JP9-15 - On - Recall All Factory Settings, Off - The Jumper Must Remain Off During Normal Operation